• Installing particle board, fibre cement, plasterboard, plywood and strip flooring to joists
• Bonding fibre cement sheet, plaster board and wall panelling to timber and metal studs
• Skirting boards, architraves and trims to walls
• Mirrors to vertical walls
• Replacing loose tiles on walls (not recommended for floor tiles)

All surfaces must be clean and free from dust, oil or other contamination. Sand painted surfaces.

Application: Cut off tip of cartridge and pierce inner foil seal, cut nozzle to desired size. Fit Nozzle to cartridge. Use continuous wavy beads spaced at 40cm intervals along flat surfaces, joists, battens or studs. Within 10 minutes, fit surfaces together and press firmly. Can be repositioned for up to 20 minutes. If bond is under immediate stress, support or clamp until a strong bond develops.

In heavy load applications e.g. subfloors, use nails or screws in addition to Max Bond Construction Adhesive. For faster bonding and for mirrors, apply to one surface only, press together, tilt panel back to allow solvent to escape then brace until set. For bonding mirrors apply a 5mm wide bead every 20cm. Do not apply in blobs.

• Squeaky Floors
• 

• Little Red Caulking Gun
• Big Red Caulking Gun
• Easy Squeeze Skeleton Gun
• Sausage Barrel Gun