MaxBond™ Rapid Cure Polyurethane adhesive is cross linking, waterproof (D4 standard), polyurethane adhesive for all types of construction applications. MaxBond Rapid Cure forms a rapid bond and is excellent where gap filling requirements are needed and in marine conditions
Not recommended for: submerged or constant water immersion, structural bonding, bonds requireing movement. Not suitable for polyethylene, polypropylene or Teflon surfaces. Cure time will be increased when used where no moisture may reach adhesive,e.g. between two non porous surfaces.
Not a flexible adhesive, designed for rigid bonding to hold surfacestogether without flex.
Ensure that temperature is above 5°C. Apply adhesive to one surface only. Bring both surfaces together and clamp. Clamping bond will ensure maximum bond strength is formed which can be 5-10 times that of unclamped bond.
Clamp for at least 30 minutes after application at 23°C, longer in cold or low humidity conditions. Note: when surfaces do not meet the product will foam and fill the cavity. Excess adhesive may foam from the edge of the joint and require trimming. To improve gap filling properties, or to increase cure speed, slightly moisten surfaces prior to application of adhesive.
Keep clamped for 30 minutes minimum, preferably longer. Strong bond will form by this time. However, ultimate bond strength usually develops in 24 hours at 23°C
Water Based Construction Adhesive
Heavy Duty Construction Adhesive (NZ only)
Solvent based cleaner