The resulting joints have greater strength and resilience than those made with conventional PVA adhesives. Cross Linking formulation assists in creating a stronger bond and reduces the chance of substrates separating over time under stress, as well as increasing water resistance.
Not recommended for: use in wet areas or use on applications where the joints will be permanently immersed in water. Must be clamped for maximum strength. Do not apply at temperatures below 5°C.
Surfaces must be close fitting, sound, dry, free from dust, oils, waxes and contamination.
Application: Apply a thin and uniform coating to one surface by squeezing the bottle or use a glue spreader, glue roller, notched trowel or brush for larger areas.
If higher water resistance is required, apply to both surfaces. Press surfaces together within 5 minutes and clamp tightly for a minimum of 2 hours.
Maximum strength is attained after 24 hours. Wipe off excess adhesive with a damp cloth whilst glue is wet.
Water Based Construction Adhesive
Heavy Duty Construction Adhesive (NZ only)
Solvent based cleaner