FulaFoam Fire Resistant Foam™ Fire Resistant Expanding Foam.
FulaFoam™ Fire Resistant Foam will fill cavities, is fire resistant for up to 3.5 hours and provides high acoustic insulation. FulaFoam™ Fire Resistant Foam will not shrink when cured and will provide an airtight seal, and can be cut, sanded, plastered or painted.
Key Benefits
- Fire resistant polyurethane expanding foam that is tested to AS1530.4 and AS4072-1992
- Efficient seal against smoke
- High bond strength
- High thermal and acoustic insulation
- Does not contain CFC’s or H-CFC’s
Consult a fire engineer before use in a fire rated application.
Pink
- Fire resistant installation of window and door frames
- Fire and smoke resistant sealing of connections between partition walls, ceilings and floors
- Filling of cavities
- Applications where fire resistant characteristics are required such as:
- Sealing of all openings in roof constructions
- Sealing of cable and pipe penetrations
- Creation of a sound-proof screen
- Bonding of insulation materials
- Application of sound-deadening layers
- Improving thermal insulation in cold store areas
Ensure that the temperature is greater than 5°C.
Application: Shake can at least 20 times before each use to ensure that contents are mixed. Screw trigger and nozzle onto the can. To inject the foam, turn the can upside down and direct nozzle into the cavity. Press trigger to release foam. When filling large cavities, do no empty the whole can at once. Fill in stages, allowing the foam to expand between each stage.
Inject the foam for between 15 to 20 seconds. Depending on conditions, the foam should skin in about 25 minutes. After it has skinned, spray a fine mist (not a puddle) of water onto the foam. Inject the next layer of foam. Repeat until the cavity is 1/3 to ½ filled.
Fula Foam™ Fire Resistant expanding foam will expand to approximately three to four times the extruded volume. Trim cured foam using a saw, knife, rasp or sandpaper.
Fibreglass
Cement Sheet
Plasterboard
Timber
Particleboard
Steel
MDF
Concrete
Aluminium
