Easy Tile™ is a pre-mixed, water based tile adhesive for interior use. Easy Tile™ sets quickly, has good water resistance and is designed for use with all ceramic tiles (except high lugged floor tiles).
Not recommended for: continuously immersed wet areas, where water seepage occurs, high load flooring applications, exterior areas, plastic, painted and other non-porous surfaces including water proofing membranes, high lugged floor tiles.
Prior to laying the tiles, cure cement render for 7days; concrete for 28 days. Surface must be clean, dry and porous and above 10°C. Do not use over old adhesive. Use a 3mm-notched trowel for mosaic and non-lugged wall tiles or a 6mm-notched trowel for other tiles.
Application: Apply adhesive to surface being tiled, slope trowel at an angle and spread evenly to eliminate air pockets. Press tiles into place while twisting them slightly to ensure the adhesive completely covers the back of the tile.
When using large wall tiles, spacers may be required to prevent movement. Start tiling at lowest point. Tiles may be repositioned for 15-20 minutes after application (time depends on temperature, humidity and ventilation).