FulaSeal™ Construction Joint Sealant is a single component, water based, construction grade sealant for interior and exterior construction sealing applications. FulaSeal™ can be used in vertical and horizontal sealing applications where a flexible joint is required.
Not recommended for: trafficable sealant, wet surfaces or water retaining structures or where pooling of water may occur. For external use, Fulaseal™ sealant must be protected from rain or water until such time as the sealant builds up a thick skin. Fulaseal™ sealant may be used both for interior and exterior sealing. Extension and compression capability ±25% when installed in properly designed joints.
Clean all joints, cracks and gaps thoroughly. Surfaces should be free from dirt, dust, grease, etc.
Application: Fulaseal™ should be applied at ambient temperature between 5° and 35° Centigrade. Higher temperatures should be avoided to prevent the possibility of bubbling of the sealant due to rapid moisture evaporation. Fill joint with trowel or caulking gun, then tool off with a spatula and clean off excess with a damp cloth.
Protect from rain or water for at least 24 hours at temperatures of 20°C until a suitable skin has formed (may require longer at lower temperatures).
Fire-rated Construction joint sealant
Hybrid moisture curing construction sealant
Hybrid moisture curing construction sealant and adhesive
Cool Room Mastic
fire rated acoustic sealant