FulaFoam PRO Gun Flexible Foam is designed to allow controlled filling and sealing of common construction materials. FulaFoam PRO Gun Flexible Foam is easily compressed, regaining shape when pressure is removed.
Limitations: Can temperature during application must be in the range of +5°C to +25°C, with air temperature in the range of 0°C to 30°C. Not recommended for constant water immersion, in foot or vehicular traffic areas or as insulation under plasticbaths as foam will compress. Must be painted/protected, not suitable for exposure to sunlight/weather.
Sealing around window and door frames
Sealing joints and penertration holes requiring flexible sealing against draughts, moisture and noise.
Ensure surfaces are clean, dry, sound and free of dust, oil old sealant or other contamination. For ideal results air and can temperature should be approximately 20°C. Protect all surfaces around the work area from contact with foam.
Application: Shake can at least 20 times to mix contents. Screw upright can onto applicator gun and tighten (don't overtighten as this will make it difficult to remove). Pull trigger on gun while directing nozzle into the cavity to be filled.
For faster expansion and a better result spray a fine mist of water onto the surfaces being filled before application. Maximum expansion takes several hours. Fill large cavities in layers allowing full expansion for each.
Clean applicator gun with Fulafoam Cleaner or acetone IMMEDIATELY after use. If excess product is cured cut or sand off. Foam will post expand up to 30%, variable dependant on temperature and humidity.
Fire Resistant Expanding Foam